Xpelair Digitemp Air Conditioning Equipment

 These units are suitable for: 				These units have the following advantages:

	Conservatories							Easy to install

	 Bedrooms						 2 Years on site warranty

	 Living Rooms					24 Hour UK help line support from the manufacturer

	 Small offices						No planning permission required

 Small commercial units				 		Suitable for some listed buildings

	 Shops					 No external condenser units required

	 I.T Suites 					 Part of the Xpelair CarbonLite range

The Digitemp is perfect for use in all domestic applications including bedrooms and conservatories. It is also suited to small commercial premises where space is at a premium and the cost of installing separate heating and cooling equipment not only exceeds, but smashes the budget.

Installation is relatively simple and mains connection is via a standard 13 amp single phase switched fused connection unit connected to your existing ring circuit.

The Digitemp in a lounge setting

The Xpelair Digitemp is a slim line unit (2.1kW or 2.45kW) with a low height of 400mm making it perfect for mounting in most conservatories, bedrooms, living rooms and small commercial units. Unit dimensions are 400 high x 870mm wide x 280mm deep .Noise levels as low as 37dbA are a feature. High level wall mounting is also possible.

Standard infra red remote control with unit shown installed at high level.

Units are available in both heating and cooling modes (WA denotes cooling only and WHP is heat pump). Cooling only units do not require a drain connection, but heat pump units have a small hose which drains to outside. All units come equipped with an infra red remote controller shown above, external grilles and wall sleeves.

This is all that can be seen from the outside.